Installing a marble gazebo with a metal dome is a complex project that involves precise design, material selection, and construction steps. Below is a simplified version of the installation guide:
In the early stages of marble gazebo installation, determine the location and dimensions of the gazebo, choose a stable and dry location, and specify the diameter of the dome and the height of the gazebo. Next, draw a detailed structural design covering the marble base, columns, dome, and metal support structure, along with a list of the marble, metal materials, and other accessories needed.
Preparing the foundation
Excavate foundation: Excavate a foundation pit deep enough to ensure the stability of the gazebo according to the design drawings.
Pouring Concrete: Pour concrete into the foundation pit and set up a reinforcing mesh to ensure the strength of the foundation. Wait for the concrete to fully cure (usually takes 24-48 hours)
Installation of the marble section
Laying the foundation:
Lay the marble base layer on top of the concrete foundation. Use appropriate adhesive to ensure that the marble is firmly bonded to the foundation.
Fixing columns:
Fix the marble columns to the foundation. Ensure that the columns are plumb and check their verticality using a level. Use steel reinforcement through the center of the columns and use strong adhesives and bracing devices for the joints between the columns.
Install the beams:
Install marble beam holders at the top of the columns (if included in the design). Make sure the beam frame is level and secure.
Installing the Metal Dome
DOME ASSEMBLY: Assemble the metal dome on the ground or supports, making sure all connections are tight and the structure is stable.
Hanging the Dome: Use lifting equipment to lift the metal dome to the top of the gazebo and place it in its intended position.
Securing the Dome: Secure the dome to the marble structure. Ensure that the connection points are secure and check the level and stability of the dome.
Post-Processing
Seam treatment: Treat the seam where the marble meets the metal and use appropriate caulking material to ensure sealing and aesthetics.
Cleaning and Maintenance
Cleaning: Thoroughly clean the marble and metal surfaces to remove any residue from the construction process.
Maintenance: Regularly inspect the structure of the kiosk to ensure that no damage or corrosion has occurred to the marble and metal parts.
With these steps, a marble kiosk with a metal dome can be successfully installed. During the construction process, it is important to follow design requirements and safety codes to ensure the quality and longevity of the gazebo. If you have other questions about the installation of the marble gazebo welcome to contact us at any time, Trevi factory will provide you with the most professional answers.
